DT-E Series

Floating Connectors

DT-E Series

Our DT-E Series support 0.5mm pitch floating connector type with power terminal.

Our DT-E Series support 0.5mm pitch floating connector type with power terminal. There are 4 terminals for power supply, and current rating is 6.0A per terminal.

Contact

Features

Current rating of the power supply terminal is 6.0A per contact
Floating amount: XY direction ±0.7mm
Compatible with high speed serial transmission, and the transmission characteristics satisfy all the requirements of SATA Rev3.0. (differential impedance: 100Ω±15%).
Connection method: stacked mating.
Number of contacts: 30, 40, 60, 80, 100, 120, and 140
Stack height: (DT0E-ST mated) 8, 10, 15, 20mm (When mated with DT0E-FS-10-T) 18, 20, 25, 30mm

Specifications

Insulator Material	LCP (glass fiber-filled) UL94V-0 material, color: black
Contact / Shell Material	Copper alloy
Contact / Shell Finish	Nickel plating base, gold plating finish
Fixture Material	Copper alloy
Fixture Finish	Nickel-plated (receptacle side), gold plated (tail) Nickel-plated base (plug side), tin-plated finish
Anti-dust Tape	Polyimide
Rated Current	0.4A per contact (contact)6.0A per contact (power contact)
Contact Resistance	80mΩ or less (contact)20mΩ or less (power contact)
Withstand Voltage	AC 200 V, 1 minute
Insulation Resistance	250 V DC, 100 MΩ min.
Operating Temperature Range	-40 °C to +105 °C

資料來源 / Source：https://kelconnectors.com/product/dt-e-series/

Floating Connectors

DT-E-FS Series

DT-E-FS is a board-to-floating connector with a printed circuit board printed circuit board that has a 0.5mm p

DT-FS Series

The DT-FS Series is a 0.5 mm pitch board-to-board floating connector with the receptacle stack height raised by 10 mm.

DT-S Series

This is a shell type of the 0.5mm pitch floating connector “DT series”.

DT Series

Our DT Series support high-speed serial signal transmission equivalent to the SATA standard while having the f