DT-S Series

Floating Connectors

This is a shell type of the 0.5mm pitch floating connector “DT series”.

This is a shell type of the 0.5mm pitch floating connector “DT series”. This type is suitable for ESD/EMC countermeasures.

Contact

Features

Floating amount: ±0.5 mm in the X and Y directions.
Compatible with high speed serial transmission, and the transmission characteristics satisfy all the requirements of SATA Rev3.0. (differential impedance: 100Ω±15%)
Connection method: stacked mating stacked mating
Number of contacts: 30, 40, 100
Stack height: 10mm

Insulator Material	LCP (glass fiber-filled) UL94V-0 material, color: black
Contact / Shell Material	Copper alloy
Contact / Shell Finish	Nickel plating base, gold plating finish
Fixture Material	Copper alloy
Fixture Finish	Nickel-plated (receptacle side), gold plated (tail) Nickel-plated base (plug side), tin-plated finish
Anti-dust Tape	Polyimide
Rated Current	0.4 A per contact (However, the maximum number of contacts that can be electrified at the same time is 140 positions.)
Contact Resistance	80 mΩ max
Withstand Voltage	AC 200V, 1 minute
Insulation Resistance	250 V DC, 100 MΩ min.
Operating Temperature Range	-40 °C to +105 °C

Our DT-E Series support 0.5mm pitch floating connector type with power terminal.

DT-E-FS is a board-to-floating connector with a printed circuit board printed circuit board that has a 0.5mm p

The DT-FS Series is a 0.5 mm pitch board-to-board floating connector with the receptacle stack height raised by 10 mm.

Our DT Series support high-speed serial signal transmission equivalent to the SATA standard while having the f